The rear spherical bearing mount ZGH is non-retrofittable. It is used for TOX®-Powerpackages with larger intensifier sections A2 > A.
The front spherical rod end ZGK is retrofittable. Attention: The rod end must be screwed securely against the shoulder on the working piston. Length compensation over the thread is not permissible.
The ZDO measures the oil pressure in the high-pressure chamber of the TOX®-Powerpackage and displays the value on a 4-digit LED display. Available as a version with two digital outputs or with one digital / one analog output.
The press force sensor ZPS can be mounted directly on the working piston of the TOX®-Powerpackage. It is possible to measure the press forces in a push and pull direction. The sensor is sealed against dirt and moisture and should be installed with the anti-rotation device ZPSV, to avoid damage to the connection cable.
The external linear position sensor provides the absolute position of the working piston in the TOX®-Powerpackage, even after power failure. Due to the external mounting on the tie rods of the TOX®-Powerpackage, the mounting position can be adapted to the conditions inside the press.
The ZDA displays the oil pressure in the high-pressure chamber of the TOX®-Powerpackage by a 5-digit LED display. The value to be displayed is measured by the pressure sensor ZDS which is included in the scope of delivery. The ZDA is available with two digital outputs or with one digital/one analog output.
Copyright © 2022 PT Eterna Karya Sejahtera